Reply with QuoteIt's not the motor, it's the motion control software or system. I'm not sure WHY it's doing it, but that is where I would focus my search.
hybrid motors
Hello, does anyone on this forum know why my hybrid motors would make a clicking sound every 3 revolutions, it's really weird because on my desktop pc it makes a clicking sound but on my laptop using a breakout board with a usb connection it runs smoothly. Has anyone else had this issue?
Similar Threads:
Re: hybrid motors
It's not the motor, it's the motion control software or system. I'm not sure WHY it's doing it, but that is where I would focus my search.
James hosts the single best wiki page about motors for CNC hobbyists on the net:
http://techref.massmind.org/techref/io/motors.htm Disagree? Tell him what's missing! ,o)
Re: hybrid motors
Thanks James, could the kernal speed, in the engine configuration effect this?
Re: hybrid motors
Sure.
James hosts the single best wiki page about motors for CNC hobbyists on the net:
http://techref.massmind.org/techref/io/motors.htm Disagree? Tell him what's missing! ,o)
