Bad link.
Yes, they are all the same, but wiring colors may be different, so you can use a diagram for one motor, for another.
I finally found a page with 8 wire stepper diagrams from jfirey & wondering if it applies to all 8 wire motors ? so are all Bipolar series,Bipolar parallel & Unipolar wired the same ?
tks
animal
Similar Threads:
Bad link.
Yes, they are all the same, but wiring colors may be different, so you can use a diagram for one motor, for another.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
post deleted due to bad links
Last edited by animal12; 05-11-2017 at 02:34 PM.
More bad links...
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
thanks ,I thought I had not sent that one with the bad links . I'll delete it if I can . ok , now to make some cables & see if I can get this machne (old max nc 10 ) to move around . I am not using the MAX electronics .
tks
animal
This page explains all the connection options for stepper motors:
techref.massmind.org/techref/io/stepper/connections.htm
James hosts the single best wiki page about motors for CNC hobbyists on the net:
http://techref.massmind.org/techref/io/motors.htm Disagree? Tell him what's missing! ,o)