Reply with QuoteWhat are the specs of the motor?
Suitable power supply for 12nm hybrid stepper kit?
I'm looking for a power supply for the 12nm motor.
It says 20-70VAC/30~100VDC.
It is not easy to find an SMPS with an output of 100 VDC 6A but torodial transformers are easier to find.
If you were me, would you use a SMPS (DC) or toroid transformer (AC)?
Similar Threads:
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby
Re: Suitable power supply for 12nm hybrid stepper kit?
What are the specs of the motor?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: Suitable power supply for 12nm hybrid stepper kit?
Ger,Originally Posted by ger21
Here is the motor+driver kit I have:
Nema34 Hybrid Servo Closed-Loop 12Nm Stepper Motor Driver CNC Kit&3M Encoder | eBay
Sent from my GT-I9300 using Tapatalk
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby
