It's probably a combination of motors and drives, Smaller motors, and better drives would probably work a lot better.
Those 1600oz motors are almost always a bad choice.
Hello,
i build one machine with:
ballscrew 1605x1000 (Y)
ballscrew 1605x650 (X)
ballscrew 1605x350 (Z)
Nema motor 34 1600oz.
All axis moves ok but the Y axis have MANY resonance.
What should i change to eliminate ou reduce the noise?
ballscrew 1610 / 2005 / 2010 ?
nema motor 23 ?
Similar Threads:
It's probably a combination of motors and drives, Smaller motors, and better drives would probably work a lot better.
Those 1600oz motors are almost always a bad choice.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)