Electronics & Compatibility

[Kretique]

Hi, I'm currently trying to pick out everything I'll need for my build but there's a few things I don't quite understand very well.
I wanted these two steppers:

https://www.amazon.com/gp/product/B00PNEPF5I/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=AWQBCGWIS S7BL x2
https://www.amazon.com/gp/product/B00PNEPI0A/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=AWQBCGWIS S7BL x1

but I'm not sure which drivers to get and what would be a proper power supply for the setup.
Would anyone be able to help me out on choosing the drivers and power supply?
I'm also going to run the machine on a C10 Board, if that makes any difference.

Thank you for your time!

Similar Threads:

• DRO wiring and compatibility...
• 64 bit compatibility?
• Cat 40 compatibility with BT 40
• DRO Connector Compatibility
• Compatibility

[neilw20]

See my PM.

[James Newton]

Most medium sized drivers can manage those. For god sake, don't buy a cheap TB6560 driver. Get a 6600 or a 6460 or whatever else. If you want the machine to freaking scream, and you can solder, my THB6064AH kit is more than enough for it.