Cheap steppers?


Results 1 to 2 of 2

Thread: Cheap steppers?

  1. #1
    Banned
    Join Date
    Sep 2005
    Location
    Sweden
    Posts
    229
    Downloads
    0
    Uploads
    0

    Default Cheap steppers?

    Hello!

    Would these be usable for a small cnc mill (hexapod or benchtop)?

    JDK-Dynasyn type 68090
    2-phase bipolar, Hybrid stepper.
    5 ohm/phase, 7.5mH/phase.
    1.8 degree/step.
    Size 23: 57,2 x 57,2 x 40mm.
    Holding torque unknown.

    They are the cheapest i have found in Sweden so far @ ~$10 each.

    /Jay

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2004
    Location
    ok / usa
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default

    I am not familiar with that stepper but I have found many steppers and miscellaneous parts in old computer printers. Here in the U.S. Pawn shops, Garage sales and Flea markets are good sources for old printers. The older the better. 1980 style printers have tons of mechanical parts including some fairly large steppers.

    I hope this helps.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cheap steppers?

Cheap steppers?