Bog stari,
Yes they are O.K. for what you need so go for it, you also need some drivers for them and ....a lot of other things .
If you need anything just pm me.
Regards.
Hello everyone from Croatia :-D
I'm new here and I need help for bouilding my new router.Is it good to use NEMA 23 1.8Degree Stepper Motors 1.26Nm/175oz-in 2.8A,for CNC router,working dimension is 50x30inch(z axis=12 inch),(300/750/1300 mm anti backlash).I will use CNC router for wood.Thanks in advance.
Similar Threads:
Bog stari,
Yes they are O.K. for what you need so go for it, you also need some drivers for them and ....a lot of other things .
If you need anything just pm me.
Regards.
If your machine working size is 50" x 30" x 12", you are using 175 oz-in motor
I guess stepper is too small. What kind of power supply and stepper driver do you have?
CNC Router Kit
Hello,Thank you two for your reply,I changed my plan,I foun on eBay cnc kit (3 Axis Drive + NEMA 23 Stepper Motor 263 Oz-in CNC Kit)(power supply will buy later:-D),I think it's good and better for my cnc (than before 175 oz) ,what do you think abaut this item:
3 Axis Drive + NEMA 23 Stepper Motor 263 Oz-in CNC Kit | eBay
Thank you for your help :-D