Need Help! TELWIN SUPERIOR PLASMA 160 - STEELTAILOR SMART III

Results 1 to 2 of 2

Thread: TELWIN SUPERIOR PLASMA 160 - STEELTAILOR SMART III

  1. #1
    Registered
    Join Date
    Feb 2017
    Location
    Italy
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default TELWIN SUPERIOR PLASMA 160 - STEELTAILOR SMART III

    The superior Telwin Plasma 16 (inverter) has a voltage of 10-300 volts output and SteelTailor smart III needs a 50-300 volts the problem is that it does not work the torch height control .. can anyone help me?
    thank you

    REAR PANEL plasma
    PIN 1 Polarizer
    PIN 2.3 MODBUS Rs485.
    PIN 4.5 Cutting arc contact. Normally open, it closes when thecutting arc is enabled. PIN
    6.7 Pilot arc contact. Normally open, it closes when the pilotarc is enabled.
    PIN 8 External power enabling command. If closed at 0[V]
    (PIN12) it will enable power. It completely replaces the torchbutton function.
    PIN 9 Voltage OUT signal. Range 0-10[V] with settable range10V/200V, 10V/300V, 10V/400V, 10V/500V. The setting requiressimultaneous pressing of the “Encoder and Select Mode”buttons when the card is booted. Select the desired range usingthe encoder. Press the “select mode” button again to exit. PIN10 Current setting IN signal 1[V] / Imax/10 [A].
    PIN11 Air pressure OUT signal 1 [V]/[BAR] range 0..10 [V] PIN12 Reference 0[V] signals PIN 8,9,10,11 and 13.
    PIN13 Power supply 12[V] max 100mA.
    PIN14 PE protective conductor.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2013
    Location
    Beijing China
    Posts
    171
    Downloads
    0
    Uploads
    0

    Default Re: TELWIN SUPERIOR PLASMA 160 - STEELTAILOR SMART III

    Hi Pillos. Sorry to reply you late. Could you pls email at service@steeltailor.com? Our technical Service manager will reply you today. Thank you for your patience . Nice day for you!

    SteelTailor--The world leader of portable CNC cutting machine
    www.steeltailor.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

TELWIN SUPERIOR PLASMA 160 - STEELTAILOR SMART III

TELWIN SUPERIOR PLASMA 160 - STEELTAILOR SMART III