HELP Please


Results 1 to 3 of 3

Thread: HELP Please

  1. #1
    Member
    Join Date
    Jul 2011
    Location
    UK
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default HELP Please

    I am trying to machine a Helical Gear but i am struggling to get Sprutcam to do the job.

    I have created the gear cutter form tool. The gear black will be mounted in a 4th axis at 20deg

    The gear needs to rotate on the A axis while feeding in X and Y to cut the teeth with the side of the gear cutter.

    I know this is possible and will be a really nice process when done but I just cant get it to program.

    Any help much appreciated.
    HELP Please-capture-jpg

    I have attached the Sprutcam file as well if it helps there are a few of my tries but no success.

    Thanks Peter



  2. #2
    Member
    Join Date
    Jul 2011
    Location
    UK
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: HELP Please



  3. #3
    Member
    Join Date
    Jul 2011
    Location
    UK
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: HELP Please

    I am trying to do this

    But the 4th axis is mounted at 20 deg rather than the spindle



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HELP Please

HELP Please