Vertical lines


Results 1 to 2 of 2

Thread: Vertical lines

  1. #1
    Member popspipes's Avatar
    Join Date
    Jun 2014
    Location
    United States
    Posts
    1777
    Downloads
    0
    Uploads
    0

    Default Vertical lines

    I have a problem that I havent had before with vertical lines or anomalies in the finished part. I have made a few hundred of similar parts and never noticed these lines.
    When i made the fixture I rotated the parts as I usually do for multiple parts, 29 degrees worked well for the part count, tool clearance etc, but I am wondering if this angle doesnt work well with the Tormach or Sprut 7 as its an odd angle?

    Have any of you guys had a problem such as this? I have adjusted the XY ways and they are in spec. I also use PathPilot v 1.9.8

    Kind of a head scratcher for me thats for sure............

    Any input on what may be a possible cause very much appreciated.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Vertical lines-img_0514-jpg  
    mike sr


  2. #2
    Member popspipes's Avatar
    Join Date
    Jun 2014
    Location
    United States
    Posts
    1777
    Downloads
    0
    Uploads
    0

    Default Re: Vertical lines

    Update on this problem, the anomolies are created in Rhino 4, it has to do with the loft.

    I will have to figure a way to do the lofts differently, parts are servicable but cosmetically they leave a bit to be desired..........

    mike sr


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Vertical lines

Vertical lines