Update on this problem, the anomolies are created in Rhino 4, it has to do with the loft.
I will have to figure a way to do the lofts differently, parts are servicable but cosmetically they leave a bit to be desired..........
I have a problem that I havent had before with vertical lines or anomalies in the finished part. I have made a few hundred of similar parts and never noticed these lines.
When i made the fixture I rotated the parts as I usually do for multiple parts, 29 degrees worked well for the part count, tool clearance etc, but I am wondering if this angle doesnt work well with the Tormach or Sprut 7 as its an odd angle?
Have any of you guys had a problem such as this? I have adjusted the XY ways and they are in spec. I also use PathPilot v 1.9.8
Kind of a head scratcher for me thats for sure............
Any input on what may be a possible cause very much appreciated.
Similar Threads:
mike sr
Update on this problem, the anomolies are created in Rhino 4, it has to do with the loft.
I will have to figure a way to do the lofts differently, parts are servicable but cosmetically they leave a bit to be desired..........
mike sr