SprutCAM, Should have done this before.

[Krisz]

Michael

Yes it is available to purchase from me. It should have been included into the package of your SprutCAM license, when you purchased SprutCAM from your retailer. Please e-mail me directly if you need a manual at tokay.tech@gmail.com

[MichaelHenry]

Krisz - thanks, email just sent.

Mike

[hockeypuck]

does sprutcam have a maintenance fee ?

[Krisz]

SprutCAM currently does not have any maintenance fee.

[johntm]

Can you upgrade from one version of SprutCAM to a higher level? Say I purchased Machinist, but then found I need true 3D and lathe. Could I purchase an upgrade or would I need to buy the full retail expert package?

[Krisz]

Originally Posted by johntm Can you upgrade from one version of SprutCAM to a higher level? Say I purchased Machinist, but then found I need true 3D and lathe. Could I purchase an upgrade or would I need to buy the full retail expert package?

You can upgrade no problem.

[Cairns]

Originally Posted by Krisz You can upgrade no problem.

I have a USB hardware lock for my version of 2007 and moved up to the beta version downloaded from he Sprut website because I was having so much trouble getting a consistent result. However after 30 days the "license" for the beta expired and I had to drop back down to the 2007 version. Apparently the beta doesn't support the hardware key?

[MichaelHenry]

Cairns,

Just guessing, but it sounds like you downloaded the 30-day demo instead of the retail version, or maybe the beta was limited to 30 days. If you email Sprut, they should be able to supply you with a link to the current retail Build of SC 2007.

Mike

[David Bord]

Goto the sprutcam forum and look for a post that I made not too long ago (djb) I had the same problem and I think I cover how I fixed it.

David