Breaking Lines

[Magnum164]

I have a model that I have joined the outside edges for a 2D contouring operation. Is it possible to separate the lines or break them and remove one line?

[RTP_Burnsville]

Did you delete or remove the segments when you created the joined curve? There is a check-box on the join dialog box for doing this. If you didn't delete the segments (have the option checked) all the individual pieces are still there. If you deleted them, I think you are going to have to use the CAD features or your CAD program to edit the curve.

Robert

[Magnum164]

Originally Posted by RTP_Burnsville Did you delete or remove the segments when you created the joined curve? There is a check-box on the join dialog box for doing this. If you didn't delete the segments (have the option checked) all the individual pieces are still there. If you deleted them, I think you are going to have to use the CAD features or your CAD program to edit the curve. Robert

No that option was not selected. I found what I was doing wrong. I was forgetting to "hide" the curves from the display. Once I hit the curves icon I could individually selected the edges of the faces again.

Thanks... You put me on the right track...