Time Estimates


Results 1 to 4 of 4

Thread: Time Estimates

  1. #1


  2. #2
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    145
    Downloads
    0
    Uploads
    0

    Default

    Yes - Just move your mouse on top of any machining operation in the simulation pane (after the operation has been simulated, of course) and you will get the machining time estimate for that operation or move your mouse over top the machine in the hierarchy in the same pane and you will get the total time. - Terry

    By the way, is anyone seeing an issue with setting multiple cutting layers in the rotary machining operation in the public release V1?



  3. #3
    Registered
    Join Date
    Aug 2010
    Location
    US
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Thanks so much for this info. It is going to help me greatly.



  4. #4
    Registered
    Join Date
    Jul 2005
    Location
    POLAND
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default

    be aware - if you using hole machining instead holes 5d you can be very surprised for the times a simple hole can be done for more than 5hrs ;-) it just wrong calculate the drilling times.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Time Estimates

Time Estimates