Need Help! Noname invertor configuration


Results 1 to 1 of 1

Thread: Noname invertor configuration

  1. #1
    Registered
    Join Date
    Feb 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Noname invertor configuration

    Hello there,


    I need your help with setup cmc 6090 4axis usb mill machine. Initial parameters of inverter (200V, 2.2 kW, 400Hz) were damaged. Unfortunately type of inverter doesn't mentioned anywhere. Digital keyboard that is used
    .

    Can you please help with inverter setup or help with getting user manual with parameter table? I've already tried with VFD-M manual, but commands doesn't match.
    Here is a photo of machine

    Will appreciate your help.
    Thanks in advance

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Noname invertor configuration-invertor-noname-jpg   Noname invertor configuration-htb1onh2dmjn8kjjszfkq6yboxxaf-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Noname invertor configuration

Noname invertor configuration