Need help setting up rs485!

[Elektryk]

Hey guys
So i had to get another vfs as my huanyang blew up
I got the magnetek gpd 333
And wanted to use the rs485 to controll the spindle
I looked in the manual of the vfd but its all Chinese to me lol i have noooo idea where to connect it and what setting to set..... please help me thx in advance


Sent from my iPhone using Tapatalk

Similar Threads:

• Need Help!- Huanyang VFD RS485 issue
• RS232/RS485. Still a need?
• RS485 for POWERMAX 65
• rs-232 and rs485 bus
• RS485, educate me please

[Elektryk]

Anyone?


Sent from my iPhone using Tapatalk

[A_Camera]

Googling "magnetek gpd 333" gives a lot of hit, quite a lot of documents in English. I don't know if this is of any help, but it seems that it is the same as Yaskawa (at least manufactured by Yaskawa), which we already have a thread about but even there are some issues. Have a look at that thread and see if it gives you any information.

http://www.cnczone.com/forums/spindl...onnection.html

Anyway, not easy without a manual and perhaps it is not the most common VFD, so it isn't very strange that nobody is help you. Have you tried to contact the seller or the manufacturer?

[Elektryk]

Googling "magnetek gpd 333" gives a lot of hit, quite a lot of documents in English. I don't know if this is of any help, but it seems that it is the same as Yaskawa (at least manufactured by Yaskawa), which we already have a thread about but even there are some issues. Have a look at that thread and see if it gives you any information.

http://www.cnczone.com/forums/spindl...onnection.html

Anyway, not easy without a manual and perhaps it is not the most common VFD, so it isn't very strange that nobody is help you. Have you tried to contact the seller or the manufacturer?

No i did not i couldnt find any proper contact info


Sent from my iPhone using Tapatalk