Need Help! Allen Bradley vfd program for mach3 control


Results 1 to 2 of 2

Thread: Allen Bradley vfd program for mach3 control

  1. #1
    Registered
    Join Date
    Jun 2017
    Location
    India
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Allen Bradley vfd program for mach3 control

    I have generic mach3 breakout board and i am using powerflex40 vfd i have tried everything but i can't control spindle speed from software.
    Breakout board has inbuilt pwm control.
    My doughts are
    Do i need more extra peripheral electronic?
    Do i need replace breakout board with more relays?



    Sent from my Redmi Note 3 using Tapatalk

    Similar Threads:


  2. #2
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Allen Bradley vfd program for mach3 control

    Quote Originally Posted by Junaidzia View Post
    I have generic mach3 breakout board and i am using powerflex40 vfd i have tried everything but i can't control spindle speed from software.
    Breakout board has inbuilt pwm control.
    My doughts are
    Do i need more extra peripheral electronic?
    Do i need replace breakout board with more relays?
    ( 1 ) relay is enough, for forward and the 10v PWM control is all you need, set up Mach3 to turn on the relay and control the PWM output, then you will be ready to connect it to the VFD

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Allen Bradley vfd program for mach3 control

Allen Bradley vfd program for mach3 control