you mean pushbuttons, correct?
You just want to go in one direction?
What kind of buttons, momentary?
Can anyone help me out on this problem? I need to have a remote on off.
Similar Threads:
you mean pushbuttons, correct?
You just want to go in one direction?
What kind of buttons, momentary?
Yes Push buttons. 1 button is ON and the other is OFF. And yes they are Momentary.
I had a 4.0 KW VFD. I had them hooked up to DCM and Forward. Now I went with a Bigger motor so I went with the 7.5 KW VFD.
my guess is that it is the same. The manual I have goes from 1/3 hp to 75 KW.
Page 37 in the manual at this link
Top diagram with run/stop. Ignoring the reverse button, wire it up that same way
Last edited by Tomzar; 05-22-2017 at 04:37 PM.
I would hazard a guess that the S1 to S7 is the same as the previous version for the PLC inputs, these would be assigned in the parameters.
There should be much more in the manual than you show.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
I take it you meant to post different pages rather than many copies of page 12?
Not sure why they would change the designations. I thought mine was the new version.