Hi I was just using my CNC and stopped my router to put on the dust collector on. When I went to start the router it wouldn't start. The red stop light is blinking. The screen says F0.00. isn't it supposed to say F600. Could this be the problem and how do I reset it to F600. Thanks
Similar Threads:
Press reset/stop button and check that the VFD is in the right mode, that's not a normal fault, for these drives so something strange is going onHi I was just using my CNC and stopped my router to put on the dust collector on. When I went to start the router it wouldn't start. The red stop light is blinking. The screen says F0.00. isn't it supposed to say F600. Could this be the problem and how do I reset it to F600. Thanks
Is your spindle Ground connected
Mactec54