Hi
I need some advice about a servo for my lathe spindle
I own a small lathe that I'm converting to CNC.
Because the lack of space behind the machine I can't change the 0.8kw motor to a 1.5kw (three phase so I can connect a VFD)
My idea was to use a AC Servo with VFD. This way I also don't need an encoder for cutting threads.
But I have no idea what I need to check to make it work.
Who can give me some advice about this topic.
I'm looking for something like this. 1.5KW, 3000RPM:
https://www.aliexpress.com/item/1pcs...8-ff6d34446976