[quote=mactec54;1223584]cnc3678
Your settings should look something like this
A001- 00
A002 – 02
A004- 400HZ
A003 – 400Hz is Spindle base frequency
A061 – 400HZ
A062 – 0
A082 – 230V/240V
A151- 0
A152 – 400HZ
A153 – 0
A154 – 100
A155 - 00
B012 – 10 Amps of your spindle
H003 – 2.2 KW this is your spindle kw rating
H004 - 2 poles most of these spindles are only 2 pole[/quote]
Just to reconfirm; these settings looks like for the X200 and not the WJ200?
As i am currently looking at the WJ200 Manual and A151/2/3 are all % 0 to 50% range.
Been trying to setup WJ200 with 300Hz 3KW (10A) Spindle and i am almost sure i am missing few settings. Anyone can post the minimum settings required to be changed for WJ200?!
Thanx.