Need CNC electrician to help wire cnc machine

Results 1 to 4 of 4

Thread: Need CNC electrician to help wire cnc machine

  1. #1
    Registered
    Join Date
    Mar 2016
    Location
    United States
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Need CNC electrician to help wire cnc machine

    I've got a custom cnc machine 5ftx10ft built, using wincnc, hsd es915 spindle,most of its wired an ready to run and I'm wondering if anyone is near Charleston SC that I could pay to give any advice on the project,I'm pretty sure its wired correctly but just looking for some back up opinion/knowledge. Ill even pay someone to travel if interested and knowledgeable on these things.

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Need CNC electrician to help wire cnc machine

    If you can't find anyone local, talk to Gary Campbell. I can get you his contact info if you need it.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Mar 2016
    Location
    United States
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Sure can you send it over, I don't know Gary. Thank you


    Quote Originally Posted by ger21 View Post
    If you can't find anyone local, talk to Gary Campbell. I can get you his contact info if you need it.




  4. #4
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Need CNC electrician to help wire cnc machine

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need CNC electrician to help wire cnc machine

Need CNC electrician to help wire cnc machine