If you can't find anyone local, talk to Gary Campbell. I can get you his contact info if you need it.
I've got a custom cnc machine 5ftx10ft built, using wincnc, hsd es915 spindle,most of its wired an ready to run and I'm wondering if anyone is near Charleston SC that I could pay to give any advice on the project,I'm pretty sure its wired correctly but just looking for some back up opinion/knowledge. Ill even pay someone to travel if interested and knowledgeable on these things.
Similar Threads:
If you can't find anyone local, talk to Gary Campbell. I can get you his contact info if you need it.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Try sending him a PM
http://www.cnczone.com/forums/members/islaww.html
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)