LinkBack URL
About LinkBacks
That is freaking awesome!
| | |
last thing
made of 777 parts!
for CNC woodcarving - 3d puzzle - furnitures
http://pagesperso-orange.fr/fabrun/
That is freaking awesome!
------------------
http://www.cncguitar.com
Thanks
It's just Solidworks power
for CNC woodcarving - 3d puzzle - furnitures
http://pagesperso-orange.fr/fabrun/
last new project
for CNC woodcarving - 3d puzzle - furnitures
http://pagesperso-orange.fr/fabrun/
I have been working on taking my SW parts into Artcam to program tool paths for my CNC. I played with it so that I can also index parts in rotation to do 3D parts including the undercuts. I have 4 axis machine, but indexing the part in 15 to 60 deg. increments works so much better, than only Y, Z, and rotation axis tool paths. By indexing the parts in SW, I get X, Y, Z, and rotation all at the same time.
If anyone else is playing with this, let me know, and I will walk you through what I have learned. I would also like to know what you have done to get full 3D machining out of a 3 or 4 axis router.
Thanks.
if you have a solidworks problem, i can help you...
for CNC woodcarving - 3d puzzle - furnitures
http://pagesperso-orange.fr/fabrun/
Posting Permissions
| | |
