I was looking to see if a texture was avalible that would be transpant.. like glass
im designing a display cabinet
thanks for the input
Yes, there's one for glass and the one for water would work too.
I was using a Acrylic(Medium-high impact) in a 2007 assembly and noticed when mating, selecting the near face was a little trickey. Filters come in handy here.
A part configuration comes in handy too, one for the basic geometry, another for the visual. I try to do this when a toolpath is added, the extra lines can be confusing for others who may have to use the model.
Last edited by pixburghenat; 11-27-2007 at 09:01 PM.