I am working on a part with 8 rows of hole around the axis and have no problem doing the linear array and then radial array to place the first for rows of holes at 90 degree intervals , the next set of four needs to be off set 45 degrees from the original hole .
figured it out, just needed to create a second plane 45 degrees from original
Last edited by panaceabea; 07-18-2007 at 10:09 PM.
Yes, or do a complete (and overworked) 45 degrees array and use "Instances to skip" to block out the ones you don't need. I should prefer the first idea about a new plane 45 degrees from the first.