| | |
Bill of Materials on Seperate dwg Sheet I would Like to take an assy. and create a Dwg. on one sheet. then I would like to create a bill of materials on the following sheet/sheets as needed.
I cannot figure out how to seperate the BOM from the Dwg Sheet. Is it possible? Any Suggestions? Thanks,
Insert a view of the model you want and link a BOM to it, then insert a new page, re-order the sheets so the new page is the first sheet, move the model to the new sheet. You may have issues as I've never had the Bom come AFTER the drawing detail but it might work. Having drawing views on sheets after the BOM, but linked back to it, is no problem.
Jerry
Last edited by JerryFlyGuy; 03-05-2007 at 08:57 AM.
JerryFlyGuy
The more I know... the more I realize I don't
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Jerry,
Thanks, That was the solution I was looking for!
It works great!
Stephen, Cartesian Machine Works
Glad it worked
Jerry
JerryFlyGuy
The more I know... the more I realize I don't
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
LinkBack URL
About LinkBacks
