plz any one can help me
I should draw (plane 2)
BUT , when i try to draw it
the plane 2 look like rotated by 90
the plane 2 , plane 3 make angle with top plane and gray rectangle drawn on top plane
Last edited by perfect-eng; 07-02-2011 at 04:56 PM.
I duplicated your first picture by selecting the Right Plane as Reference 1 and set the angle to 25 degrees. Your second pic was duplicated by selecting the Top Plane as Reference 1 and setting the angle to 65 degrees.
HTH means Hope This Helps
AP are my initials