Solide Edge ST4 scaling down.

[Jrsmiff]

hello,

I used solid edge ST4 to draw a part. But I just realized I used a wrong scale .. so evrything is 10 times bigger than it has to be. :s It took me alot of work to draw it, so I hope anyone can tell me how to scale it down.

Cheers.

[BurrMan]

I found this documentation, but I dont have the ST4 program to search for if it is correct for you.. See if this leads you to the answer.

Create a new part and then use the part copy facilty to select the original part that you want scaling. In the 'select part copy' window there is an option to change the scale.

[Jrsmiff]

BurrMan thank you so mutch, it worked.

You made my day.