| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| SolidCam Discuss SolidCam software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-10-2009, 07:25 AM
| |||
| |||
Hi there, I am admittedly new to both SolidCAM and the Bridgeport machine I am using atm. I am attempting to get a small part file from Solidworks to the CAM programme and then use the machine to mill it. My problems have arrised from the fact that I do not have the post processor for the machine or the Heidenhain TNC 310 control I am using. I cannot get from SolidCAM to the machine. I would really appreciate any help finding this post processor and also any general help with using these programmes that are very new to me.  |
|
#2
12-10-2009, 07:48 PM
| |||
| |||
| I have attached a post for a TNC 355 which will work no problem with your TNC 310. Let me know if this works. I have assumed its just a 3 axis machine but if its is 4 axis I have a post for that to! Jake T-B |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
