Error in solidcam!

[linefresogkos]

Helo.

I het a messeage when i run solidcam!

"This application has requested the Runtime to terminate it in an unusual way
Please contact the applications support team for more information. "

can somone help me?

[Brakeman Bob]

Hello,

What version of SolidCAM are you running?
Are you service packs up to date?
Are you running a network dongle and the "nethasp.ini" file is up to date.

I have seen this error myself when I installed SolidCAM 11.1 SP0 (it turned out to be a SolidWorks thing). Your reseller should be able to help you on this.

[linefresogkos]

I running SolidCAM 11.1 SP0! But i`m alsow running Vista. Is this a problem?

[Brakeman Bob]

Originally Posted by linefresogkos I running SolidCAM 11.1 SP0! But i`m alsow running Vista. Is this a problem?

Yes it is! Upgrade to SP2 asap. SP0 was a complete dog but SP2 is a good stable system (it is what I was using for production up until last Wednesday). Vista is also a problem as both SolidWorks and SolidCAM recommend XP Pro.

[linefresogkos]

Originally Posted by Brakeman Bob Yes it is! Upgrade to SP2 asap. SP0 was a complete dog but SP2 is a good stable system (it is what I was using for production up until last Wednesday). Vista is also a problem as both SolidWorks and SolidCAM recommend XP Pro.

I have google`d a lot after sp2 for solidworks 2007. I cant find it, The uppdate mannager wodn`t work on vista! But i hope i find it.

Thank`s.

[axis]

i just changed to xp pro 64 on my computer and solidwork seems to be running better than before but now, solicam is down loaded but it will not load in solidworks at all. its on my computer but i cant load. is there a patch for this i have tryed the website but nothing. they sead i would get the latest updates and info and sp by email but nothing so far and it has been over a year. i could go on but i just want it to work it is vesion 10 i have the donngle that the progam dosnt seem to find. is xp pro 64 my problem

[Brakeman Bob]

Originally Posted by axis i just changed to xp pro 64 on my computer and solidwork seems to be running better than before but now, solicam is down loaded but it will not load in solidworks at all. its on my computer but i cant load. is there a patch for this i have tryed the website but nothing. they sead i would get the latest updates and info and sp by email but nothing so far and it has been over a year. i could go on but i just want it to work it is vesion 10 i have the donngle that the progam dosnt seem to find. is xp pro 64 my problem

The SP's are available on the SolidCAM website (http://www.solidcam.com/) and go to the DOWNLOADS page, log in and it is yours.

There are issues with XP 64, SolidWorks 64 and V11.1, SolidCAM V11.2 has been out for a while (now at SP2.1) this (I believe) can run on 64 bit architecture but SolidCAM are still saying to stick with 32 bit software until Version 12 comes out sometime in Q1 next year. Personally, I will not be moving over to V12 until at least SP1.

[linefresogkos]

I stal have a problen running solidcam, but i tink that vista is the problem?? I have uppgradet my solidworks to 2008. But it stil downt work! Somthing to do? www.solidcam.com tels mi nothing!

[Brakeman Bob]

Originally Posted by linefresogkos I stal have a problen running solidcam, but i tink that vista is the problem?? I have uppgradet my solidworks to 2008. But it stil downt work! Somthing to do? www.solidcam.com tels mi nothing!

Yes, I think Vista is the source of the problem. Can you dual boot on your machine?

SolidCAM V11.2 is now up to Service Pack 3.

Get in touch with your reseller as you may need a new dongle.

[axis]

i have been told a 64 bit edition is out this feb so that will probly fix your vista problem and my xp pro 64 problem.

[yasemintalay]

Originally Posted by linefresogkos I stal have a problen running solidcam, but i tink that vista is the problem?? I have uppgradet my solidworks to 2008. But it stil downt work! Somthing to do? www.solidcam.com tels mi nothing!

SolidCAM does not support vista and 64 bits windows for now. You should install windows xp for SolidCAM.

[Onstage]

Hi everyone!

I have the same problem, which I encounter when opening a saved part.
Running SolidCAM 11.1 SP0.0. Why? A "safety copy" is hard to update, but that´s something I have to live with.

I have actually made an inquiry to SolidWorks, since I like the program (s) a lot!

Best regards/D