Selca S4000 Post processor for SolidCam

[claudiu220405]

Hello everyone,
I work with CNC machines, and from a whyle I must program a SELCA S4000, and I do not have a Post processor for SolidCam, please, need help.

EMERGENCY!

[claudiu220405]

So, there is nobody that can give me this post processor.
Then I started to make it by myself.
I have one problem, I must to generate something like this:
G20X...Y...I...
The promblem is that after "I" i must generate the arc radius or diameter/2.
What is the formula? i tryed arc_radius, arc_diameter circle_radius, cirlce_diameter, and none of thous did not works.
Please need help.
Thanks!

[claudiu220405]

Can anybody help me?
Still waiting!

[solidcamx]

Hello everyone,
I work with CNC machines, and from a whyle I must program a SELCA S4000, and I do not have a Post processor for SolidCam, please, need help.

EMERGENCY!

I can with your help fast that you do postprocessor

[solidcamx]

Originally Posted by claudiu220405
Hello everyone,
I work with CNC machines, and from a whyle I must program a SELCA S4000, and I do not have a Post processor for SolidCam, please, need help.

EMERGENCY!

I can with your help fast that you do postprocessor solidcamx@gmail.com