Solidcam/Solidworks Machine Simulation holder issues


Results 1 to 3 of 3

Thread: Solidcam/Solidworks Machine Simulation holder issues

  1. #1
    Registered
    Join Date
    Sep 2017
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Solidcam/Solidworks Machine Simulation holder issues

    Having some trouble with machine simulation. I overcame it some how on one test part (part a), but can't for the life of me figure out how to on the next one (part b).

    The holder is not aligning properly on the Z axis. You can see when looking at the holder on the mounting view that it looks correct for both part a and part b. Now actually doing a simulation with machine simulation, part a looks correct, but part b has the holder lower than it is suppose to be. This misaligned the tool lower on the tool path by the same distance.

    Any suggestions?

    Mounting Part A:


    Mounting Part B:


    Machine Simulation Part A:


    Machine Simulation Part B:



    Tool lower than tool path Part B:


    Similar Threads:
    Attached Thumbnails Attached Thumbnails Solidcam/Solidworks Machine Simulation holder issues-1-jpg   Solidcam/Solidworks Machine Simulation holder issues-2-jpg   Solidcam/Solidworks Machine Simulation holder issues-3-jpg   Solidcam/Solidworks Machine Simulation holder issues-4-jpg  

    Solidcam/Solidworks Machine Simulation holder issues-5-jpg  
    Last edited by O-MX45VAE; 09-19-2017 at 01:00 PM. Reason: Fixed images


  2. #2
    Registered
    Join Date
    Sep 2017
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: Solidcam/Solidworks Machine Simulation holder issues

    Edited to update the images.



  3. #3
    Registered
    Join Date
    Sep 2017
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: Solidcam/Solidworks Machine Simulation holder issues

    Spoke with my vendor and they helped out. Came down to H-Length, in case anyone has a similar issue.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Solidcam/Solidworks Machine Simulation holder issues

Solidcam/Solidworks Machine Simulation holder issues