I need one for InventorCAM for a Centroid control. It takes Fanuc code. The posts that come with InventorCAM are full of bugs. Shameful that they even include such poor posts.
Several finished postprocessor for SolidCam.
solidcamx@gmail.com
Similar Threads:
I need one for InventorCAM for a Centroid control. It takes Fanuc code. The posts that come with InventorCAM are full of bugs. Shameful that they even include such poor posts.
These postprocessor appropriate for inventorCAM.
greeting
These postprocessor have been tested and work perfectly.
I'm programming a postprocessor what you want?
greeting
Thank you. Can you recommend a program to open .RAR files?
These are the guidelines for a Centroid post processor:
Centroid M-Series Post Processor Information
Thank You.
Oh, it is InventorCAM 2012 if the release year matters.
Thanks,
Scott
Please contact via e-mail: solidcamx@gmail.com
password for these files please!
Thank You.
Please contact via e-mail: solidcamx@gmail.com
Write me postprocessor need? I'll write a postprocessor you want.
My email: solidcamx@gmail.com
solidcamx
Yeah, he never responded to my private e-mail.
What a way to get business....put up some posts then not give the password.
Sounds like a cheesy businessman to me.
I heard that you can get basic working posts from Solidcam for $400.
Yes, it can be purchased for $ 250.
greeting