pcut and r510a

Results 1 to 2 of 2

Thread: pcut and r510a

  1. #1
    Member
    Join Date
    Mar 2003
    Location
    Saskatchewan, Canada
    Posts
    69
    Downloads
    6
    Uploads
    0

    Default pcut and r510a

    When cutting just a circle, it seems that pcut can cut the circle with a g02, but cannot cut with g03. Sometimes it cannot cut with the g02 but will with the g03. It seems it has something to do with what direction it has approched the circle with. Also, when the torch height control is used, a high voltage value (which indicates that the flame is to long) drives the z axis motor in the wrong direction. Anyone else notice this. I have tried to ask Vlad, but seem to get ignored.

    David Paulson.

    Similar Threads:
    D. Paulson


  2. #2
    Registered
    Join Date
    May 2004
    Location
    Poland
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    pCut have bug prone architecture so strange things like this can happen quite often. Be careful on what CPU you are running pCut, the faster CPU you have than the communication with board will be more unstable (bugs in time dealy code).



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

pcut and r510a

pcut and r510a