Most breakout boards can handle 4 axis, even the $5 ones from Ebay.
Greetings. This is my first post to the forum. Kind of a newbee to building the cnc stuff. I got my hands on an eagle plas system cheap and have built a new table and gantry for the hardware I have added a second motor for the x axis. I would like a few suggestions for a 4 axis breakout board so I can slave the x drives. Thank you for your time.
Similar Threads:
- Need Help!- 6 axis breakout board
- Shematic for 5 axis breakout board
- Need Help!- 5 axis breakout board and 3 single axis drivers tb6560, not working
- Need Help!- 4 Axis Breakout Board Help
Most breakout boards can handle 4 axis, even the $5 ones from Ebay.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)