Smithy Machines Alive & Well In 2009

[nedtron]

Greetings,

The Smithy Machines Yahoo group is alive & well in 2009!:

http://groups.yahoo.com/group/smithy-machines/


Over 850 photos of projects by Smithy Machines group members:

http://www.home-machine-shop.com/pro...-machines.htm/


Smithy manuals, wiring diagrams and other Smithy support documents are available for viewing or download at the Smithy Support Files (Flash) website:

http://www.home-machine-shop.com/Smithy-Support/


Direct access to Smithy support files:

http://www.home-machine-shop.com/Smithy-Support-Files/


Free machining related file downloads and home machine shop resources:

http://www.home-machine-shop.com/

Ned

[sharpshooter90]

Ned,
Where can we find a support group for the smithy bulldozer?

[nedtron]

Greetings,

Smithy didn't have those very long and there doesn't see to be anything available.

Ned

Ned,
Where can we find a support group for the smithy bulldozer?

[65mustangguy]

me and my brother just purchased an older (1983?) smithy 1224????

lathe/mill

this thing has been upgraded beyond belief from a manual to CNC , the probelm is im sure now since this thing was CNC'ized there has to be a simpler cnc software/editor?? any thoughts?

it has a gecko drive and winnc?????? software????
im supposed to learn the ins n outs of this thing so any direction would be greatly appreciated

[nedtron]

Greetings,

The Gecko drives are good!

Unfortunately, I am not familiar wth WINNC.

My Smithy Granite does not have CNC.

I have a Sieg Super X3 (Grizzly G0619) that has had a CNC conversion and I use Mach3 for the CNC controller software.

http://www.home-machine-shop.com/X3_...er_X3_Mill.htm

http://www.home-machine-shop.com/CNC_Part/

http://www.machsupport.com/

For simple jobs, I just enter G code in Mach3 and run it.

For more complex jobs I use Visual Mill to generate the G code and then run it in Mach3.

http://www.mecsoft.com/visualmill.shtml

Did you receive any documentation for the software included with the machine?

Have you researched the software provider's website?

Down loading and reading the Mach3 manual might help provide a better understanding of CNC.

http://www.machsupport.com/docs/Mach...all_Config.pdf

You might consider joining the Smithy Machines group:

http://groups.yahoo.com/group/smithy-machines/

Ned
http://www.home-machine-shop.com

me and my brother just purchased an older (1983?) smithy 1224????

lathe/mill

this thing has been upgraded beyond belief from a manual to CNC , the probelm is im sure now since this thing was CNC'ized there has to be a simpler cnc software/editor?? any thoughts?

it has a gecko drive and winnc?????? software????
im supposed to learn the ins n outs of this thing so any direction would be greatly appreciated