Page 2 of 2 FirstFirst 12
Results 13 to 19 of 19

Thread: DRO PRO on CZ 1236 & LX 329

  1. #13
    Registered
    Join Date
    Aug 2009
    Location
    usa
    Posts
    89
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by scudzuki View Post
    fastlane, if you installed a magnetic system, you clearly did NOT install an Electronica system.
    I'm betting he did not, and his reasons for posting here were two fold :
    1st- cut down the Smithy machine by equating it to a Harbor Freight.
    2nd- advertise for his company

    besides, fastlane is also a shoptask owner or so he says.

    "I had a Quadralift machine which was equipped with the traditional style compound. When I bought my Tri-Power it came with the " hang off the side" style of compound."
    Last edited by flatheadford49; 11-25-2011 at 02:49 PM.


  2. #14
    Registered
    Join Date
    Jul 2005
    Location
    usa
    Posts
    146
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by flatheadford49 View Post
    I'm betting he did not, and his reasons for posting here were :
    cut down the Smithy machine by equating it to a Harbor Freight.
    Smithy and Harbor Freight machines come from the same factory-
    check it out for yourself

    山东临沂金星机床有限公司-官方网站


  3. #15
    Registered
    Join Date
    Aug 2009
    Location
    usa
    Posts
    89
    Downloads
    0
    Uploads
    0
    fastlane,
    Since you are here, would you please answer a question that I asked jdclark,sharpshooter and smallblock, but received no reply.
    Why do guys that say they own shoptask machines come to the Smithy forum and post crap. Why the shoptask on smithy nonsense, this makes no sense to me.
    Did smithy steal shoptask best girl or something.


  4. #16
    Registered
    Join Date
    Jul 2005
    Location
    usa
    Posts
    146
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by fastlanecafe View Post
    Smithy and Harbor Freight machines come from the same factory-
    check it out for yourself

    山东临沂金星机床有限公司-官方网站
    Not sure what happened to the above link, but following is another- hope it doesn't get scrambled.

    'muti-purpose machine direct from

    Flathead- why do you open subjects, make comments and then complain when people respond.


  • #17
    Registered
    Join Date
    Aug 2009
    Location
    usa
    Posts
    89
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by fastlanecafe View Post
    Flathead- why do you open subjects, make comments and then complain when people respond.
    I'm just trying to get an answer. Again, I ask, why do guys that say they own shoptask machines, are over here on the smithy forum posting crap.


  • #18
    Registered
    Join Date
    Jan 2008
    Location
    usa
    Posts
    332
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by flatheadford49 View Post
    fastlane,
    Since you are here, would you please answer a question that I asked jdclark,sharpshooter and smallblock, but received no reply.
    Why do guys that say they own shoptask machines come to the Smithy forum and post crap. Why the shoptask on smithy nonsense, this makes no sense to me.
    Did smithy steal shoptask best girl or something.
    Flathead,
    I don't know what your problem is, but get this straight- I never posted anything negative about Smithy or anyone else. I read all the 3 in 1 forums and sometimes add comments or try to help if I have an answer to someone's question.
    See this post
    http://www.cnczone.com/forums/smithy...otor_96_a.html

    I did a little search under your name and could not find one post in which you made a positive contribution. Get a grip.

    PS- Smithy doesn't need to steal anyone's girl as long as they have you.


  • #19
    Registered
    Join Date
    Aug 2009
    Location
    usa
    Posts
    89
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by smallblock View Post
    Flathead,
    I don't know what your problem is, but get this straight- I never posted anything negative about Smithy or anyone else. I read all the 3 in 1 forums and sometimes add comments or try to help if I have an answer to someone's question.
    See this post
    http://www.cnczone.com/forums/smithy...otor_96_a.html

    I did a little search under your name and could not find one post in which you made a positive contribution. Get a grip.

    PS- Smithy doesn't need to steal anyone's girl as long as they have you.
    I read that post. That was a great post, full of good information, and you didn't even try to sell him a shoptask. Keep'em coming like that.


  • Page 2 of 2 FirstFirst 12

    Similar Threads

    1. Jet 1236 lathe add router ?
      By gitarre10000 in forum DIY CNC Router Table Machines
      Replies: 2
      Last Post: 03-29-2011, 11:26 AM
    2. Microkinetics 1236 cnc lathe conversion kit
      By Don Clement in forum General Metal Working Machines
      Replies: 3
      Last Post: 11-05-2008, 03:59 PM

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.