Hey, if I remember right I got the same error # 12 when changing the battery the first time and
had to turn off the machine. Then, all the parameters and you have to go in and reformat the machine.
If so, you set the wireless communication parameters first. To receive the following protocol to read:
RTS, 7 data bits, no parity, 2 stop baudrate 9600
5010 0000 0000
5011 1100 0111 9600 might be too high in 1100 0100 = 1200 baud
5012 0000 0000
5013 1100 0111
If you set your PC in the same so you can fill in all parameters.
The file or files contain the headings:
it only takes a few minutes to fill up the process but how you do on the console will
I unfortunately do not remember. You must be sure to go through the key position 1
and enter the password that tends to be 1111 this is a little help along the way, I hope.
Let me now if this works. Maybe I can send all data to yo if you don´t find your own.