- Sinumerik 828D. SNCK not initialized for simulation.
-
Registered
Sinumerik 828D. SNCK not initialized for simulation.
Hi everyone.
I have problem with initializing simulation. It's started after I tried to create new subprogram. Unfortunately I picked wrong name for it, which started from 2 digits - 30DEG.SPF. At the moment file no longer exist in NC data->Cycles->User cycles folder, however systems stills see that file (I think).
I'm getting following errors and I can't run simulation:
12080 - Channel 1: Block N1 syntax error in text
15175 - Channel 1: Block program _N_30DEG_SPF. Interfaces could not be build
Thanks for any help.
Similar Threads:
-
-
Member
Re: Sinumerik 828D. SNCK not initialized for simulation.
I have the same problem. Started after I added a subprogram to the custom cycles folder. No clue how its related, but I guess it must be somehow. Anyone got a clue?
-
Registered
Re: Sinumerik 828D. SNCK not initialized for simulation.
I solved this by reseting simulation. [Menu select]->[HMI]->(>> - more options)->[Reset simulation].
-
Member
Re: Sinumerik 828D. SNCK not initialized for simulation.
Thank you! This fixed everything. Still not sure what went wrong in the first place. Not going to complain though. Thanks again!
- Sinumerik 828D. SNCK not initialized for simulation.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules