- Need Help!- Superslant GN6
-
Registered
Superslant GN6
Hello, I have checked the archives on here and gotten nowhere. I have a Hardinge Superslant with Siemens drives. I am only getting .6 volts to CR 27 where it requires 1.1 volts. can anyone tell me what criteria need to be met on the board to get the correct voltage to CR 27?
It has something to do with the K1 relay.
Similar Threads:
-
- Need Help!- Superslant GN6
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules