Need Help! Chiron fz12w error

Results 1 to 5 of 5

Thread: Chiron fz12w error

  1. #1
    Registered
    Join Date
    Oct 2013
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Chiron fz12w error

    Hi everyone
    Recently we purchased used chiron fz12w with sinumerik 810m ga1 twin pallet german language
    My question is that i do not know how to change pallet is there any m code or special procedure for pallet changing
    2nd question when we type a command in automatic section or part programming , i write command and when i hit the enter button control freeze and do nothing
    I tried reorg commsnd to reorganize part program memory but also system freeze with the alarm "reorg activ" but anywhere i can use this enter button and give the command to control like overstore but freeze in mdi and part program section
    Thank you

    Similar Threads:


  2. #2
    Member tld70's Avatar
    Join Date
    Aug 2009
    Location
    Stockach
    Posts
    115
    Downloads
    0
    Uploads
    0

    Default Re: Chiron fz12w error

    Hello,
    The M function for the pallet changer is M71.

    Regards
    Thomas



  3. #3
    Registered
    Join Date
    Jun 2014
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Chiron fz12w error

    I know it's several months later, but I just found this. There are codes for each pallet. M31 calls pallet 1 under the spindle and M32 calls pallet 2.



  4. #4

    Default

    Quote Originally Posted by tld70 View Post
    Hello,
    The M function for the pallet changer is M71.

    Regards
    Thomas
    Hello,

    I have Chiron FZ12W that had PLC failure. I replaced PLC but now i dont have parameters for Pallet changer and tool changer. Can you maybe send me backup of your machine?

    Thank you, Milan.



  5. #5
    Member tld70's Avatar
    Join Date
    Aug 2009
    Location
    Stockach
    Posts
    115
    Downloads
    0
    Uploads
    0

    Default Re: Chiron fz12w error

    Hi Milan
    can you provide a MachineNumber.
    Regards
    Thomas



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Chiron fz12w error

Chiron fz12w error