Need Help! Software Simodrive 611

Results 1 to 2 of 2

Thread: Software Simodrive 611

  1. #1
    Member
    Join Date
    Nov 2005
    Location
    Germany
    Posts
    111
    Downloads
    8
    Uploads
    0

    Default Software Simodrive 611

    Hello,
    does someone knows a software to read the parameters from a simodrive 611 AM-Modul with a serial port?

    Many Thanks

    Hans

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2017
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Software Simodrive 611

    I think you mean profibus port?

    Does it look like a serial adapter? 9-Pin D-Sub?

    Jokes on you, they only use 4 pins.

    the best way is to use what Siemens calls an MPI cable like this.

    You will need Step 7 version 5.5. To use the cable you will have to select the correct port in a little control panel section that will be installed with step 7 called "Set PG/PC Interface" to your USB port (comm1 usually) with MPI as the designator.

    You could probably hack your way through it. You can sniff the memory blocks and read /write anywhere with s7.net for c# or snap7 for python.

    Last edited by FailerJerry; 05-30-2017 at 05:58 PM. Reason: e: added some links.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Software Simodrive 611

Software Simodrive 611