Newbie Stepper or DC motor? And IC? - CNCzone.com-The Largest Machinist Community on the net!

Welcome to the CNCzone.com-The Largest Machinist Community on the net! forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

		CNCzone.com-The Largest Machinist Community on the net! > WoodWorking Machines > DIY-CNC Router Table Machines
Newbie- Stepper or DC motor? And IC?

DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here!

Thread Tools

Display Modes

11-06-2009, 03:10 PM

MauroKSS

Join Date: Jul 2009

Location: Argentina

Posts: 8

Stepper or DC motor? And IC?

Hey people!

I've found this motor which is spectacular.

It has 5 wires, but the power supply wires are separated from those 5. And it has positive and negative.

And about the IC, I've found a PBL3717A IC.. I wanted to know if it works with this kind of motors.

I also have a lot of others 5/6 wire motors. But I can't find any info in the internet about them.

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Power Supply for 4 Stepper Driver 32-65VDC and 4 Stepper Motor 65V 2.3A	guy2b1	DIY-CNC Router Table Machines	15	05-13-2009 02:31 AM
Stepper motor vs. Servo motor	Tony611	General Electronics Discussion	28	11-19-2008 09:11 AM
use satellite dish actuator motor as a stepper motor	ozni	Stepper Motors and Drives	1	10-25-2007 05:04 PM
Beltdrive-stepper motor-stepper motor driver	Georg	Stepper Motors and Drives	0	10-16-2007 05:56 PM
servos motor controled by stepper motor driver?	mike10	Servo Motors and Drives	1	01-03-2005 06:05 PM

All times are GMT -5. The time now is 06:38 PM.