Speed how fast an axis can move? - CNCzone.com-The Largest Machinist Community on the net!

Welcome to the CNCzone.com-The Largest Machinist Community on the net! forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

		CNCzone.com-The Largest Machinist Community on the net! > Machine Controllers Software and Solutions > General CNC (Mill and Lathe) Control Software (NC)
Speed how fast an axis can move?

General CNC (Mill and Lathe) Control Software (NC) General Discussion of CNC (Mill and Lathe) control software here!

Thread Tools

Display Modes

01-04-2005, 11:05 PM

jlagran he jlagran he is offline

Join Date: Oct 2004

Location: Indonesia

Age: 34

Posts: 10

Speed how fast an axis can move?

Hi...

I just done build my CNC router..

click:

www.geocities.com/rcaeromodel/cnc

I use www.hobbycnc.com controller and stepper motor..
and using Turbo cnc as software controller

The queston is the moving speed of each axis..

The axis max speed is only about 300 hz (just setting config at Turbo CNC)
if I set more than 300 hz the stepper is confusing, some time move some time not, or difficult to find which way to move (CW or CCW).

It is why The CNC fail to execute G0 order.

Anyone have experience about this?

How much max Hz that is "normal" to set the config of an axis?
Can anyone reach 2.000 hz as max speed of axis? so the G0 will so fast?

Thanks a lot

__________________
Everyday is Sunday

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Biesse Machine and MeshCam - HELP	nem3	GRZ Software- MeshCAM	11	09-28-2007 09:57 AM
4020 4th axis problems	little bubba	Fadal	3	06-13-2005 10:08 PM
How fast is you speed?	WallCrawler	CNCzone Club House	32	06-19-2004 03:02 PM
min speed exceeds max speed for axis "x"?	ljoe1969	TurboCNC	4	01-19-2004 08:49 AM
Does controller change axis motor speed?	samualt	DIY-CNC Router Table Machines	5	10-10-2003 05:05 PM

All times are GMT -5. The time now is 02:38 PM.