Metal Mill - CNCzone.com-The Largest Machinist Community on the net!

Welcome to the CNCzone.com-The Largest Machinist Community on the net! forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

		CNCzone.com-The Largest Machinist Community on the net! > MetalWorking Machines > General Metal Working Machines > Vertical Mill, Lathe Project Log
Metal Mill

Vertical Mill, Lathe Project Log Post your project building or converting logs here for lathes or milling machines.

Thread Tools

Display Modes

12-24-2004, 12:23 PM

coolman

Join Date: Nov 2004

Location: USA

Posts: 44

Metal Mill

I am building a metal mill using 3" x 3" x 0.25" mild steel square tube and the plates are 0.25" thick. The size is about 62" x 62" square. I am welding some of the plates to the square tube using a MIG welder and bolting the pieces together. Here is a picture:

Attached Thumbnails

Click image for larger version

Name: gantry_table2_resized.jpg‎
Views: 138
Size: 57.7 KB
ID: 4339

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to mill angles?	cowanrg	General Metalwork Discussion	19	05-14-2007 10:35 AM
Bridgeport mill newbie question...	GalaticDan	Bridgeport and Hardinge Mills	3	06-06-2005 03:02 AM
Tree Mill conversion Questions	Flyinfool	General Metal Working Machines	7	05-27-2005 11:37 PM
Any options for an old mill?	bjorn	General CNC (Mill and Lathe) Control Software (NC)	1	03-04-2005 11:55 AM
Pictures of My Lathe & CNC MILL	studysession	General Metal Working Machines	14	01-04-2005 05:07 PM

All times are GMT -5. The time now is 12:56 PM.