Need Help!- 97 SL150-SMC Need operation manual

[enduroed]

Hey folks, first time here. Just started a business and bought a 1997 MS SL150-SMC from a company in Wisconsin. The pictures looked good but have never seen a worse kept machine. At least the oils were clean. Have so far spent 30 hours cleaning it, have at least another 10-15 left.

Anyway, I need a Operation Manual 1 for the machine. I have the OM 2 but not the 1. Maruka (who sells MS) wants $350. I think that is a little rediculous. I asked Maruka if they had it on .pdf but they did not.

Could also use a G & M code list if someone has something.

We have a start-up warranty and have had a few things replaced, hopefully the machine is healthy. Definetely learned a thing or two about used machine purchases. Will not buy from this company again.

The control is a MSC 518TC which is really the Fanuc 18TC.

Would also be interested in any Fanuc info.

Any help will be greatly appreciated.

Tks, Ed

[dbstream]

provide yr e-mail address

[enduroed]

edwardnichols@hotmail.com

Thanks for the help.

Tks, Ed

[mluqman]

maybe this link could be useful for another FANUC FAQ http://cnctechlearn.blogspot.com