Forum Home | RFQwork | CNCauction | 3dxhobbies |Welderzone | Share Files | Site Map | Links |
CNCzone.com-The Largest Machinist Community on the net!


Welcome to the CNCzone.com-The Largest Machinist Community on the net! forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Home Page Today's Posts My Replies Classifieds Reviews Photo Gallery Web Links Share Files Mark Forums Read Advertise With Us Ad List
Go Back   CNCzone.com-The Largest Machinist Community on the net! > MetalWorking Machines > Mori lathes
Reload this Page Mori SL-2
Register Blogs FAQ Donate Calendar Search Today's Posts Mark Forums Read Videos

Notices

Mori lathes Discuss Mori lathes here.


Reply
 
Thread Tools Display Modes
  #1   Ban this user!
Old 10-20-2008, 02:16 PM
JMECKES JMECKES is offline
 
Join Date: Oct 2008
Location: USA
Posts: 22
JMECKES is on a distinguished road
Mori SL-2
I have an old Mori SL-2 with a 3T Fanuc control. Powered it up this morning and found that the spindle would only go about 200rpm during warm-up. We had this problem before and it was a fuse. No such luck this time. Can anybody point me in a direction for diagnosis?
Reply With Quote

  #2   Ban this user!
Old 10-30-2008, 11:33 PM
Daypass Daypass is offline
 
Join Date: Sep 2006
Location: usa
Posts: 6
Daypass is on a distinguished road
10/20 found the problem yet? need more info to help. Alarms? G50 cap on speed? noises?
Reply With Quote

  #3   Ban this user!
Old 10-31-2008, 08:06 AM
JMECKES JMECKES is offline
 
Join Date: Oct 2008
Location: USA
Posts: 22
JMECKES is on a distinguished road
We found a momentary voltage drop off on pin #1 on the drive board, but then it seemed to recover. Machine is now running. We have a meter on it to let us know if there is another voltage drop. There were no alarms probably due to the signal getting through and spindle start confirmed even though it didn't get to speed commanded. Had to find a break in the line when it is so intermittent. We'll just have to wait until it drops again.
Reply With Quote

Reply



« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
mori-seiki ron2008 Mori Mills 2 10-08-2008 04:22 PM
MORI Mori G-Code Programing 7 07-07-2008 01:16 PM
Mori or Hitachi Paul in OK Mori lathes 1 03-12-2008 03:00 PM
Mori w/10T grease Fanuc 2 10-26-2007 06:10 PM
mori dj stu Post Processor Files 3 03-17-2005 01:14 AM




All times are GMT -5. The time now is 12:40 PM.

Contact Us - CNCzone.com - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
CNCzone,LLC Copyright ©2007,2008