SL25A500 with Fanuc15TF control - CNCzone.com-The Largest Machinist Community on the net!

Welcome to the CNCzone.com-The Largest Machinist Community on the net! forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

		CNCzone.com-The Largest Machinist Community on the net! > MetalWorking Machines > Mori lathes
SL25A500 with Fanuc15TF control

Mori lathes Discuss Mori lathes here.

Thread Tools

Display Modes

08-11-2008, 04:02 AM

bobecm

Join Date: Aug 2006

Location: Serbia

Posts: 11

SL25A500 with Fanuc15TF control

Hi gay's
Is there anybody who can help me about analisys I/O board M022 for Operation Panel. Problem is machine behavior: without any operator action mode machine are changed, manual spindle speed settings are changed, MACHINE READY LED, TURRET START LED turned off, X axis zero return LED turned ON absolutely without any operator action. I tryed to contact Mori service through local Mori represent, but thay cannot help me. If any knows way to purchase this board, please let me know. Thanks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Seig x2 Speed Control and c6 Control Board	skmetal7	Benchtop Machines	2	04-21-2008 04:17 PM
15i control help for (AiCC) (hpcc) high precision contour control programming	gibbsmaster	Fanuc	2	12-28-2007 10:57 AM
Using Flashcut CNC Spindle rotate card control to control laser power	pyroplotter	FlashCut CNC	0	10-15-2007 10:46 PM
Need to replace Dynapath 20 control with new control	Cycle Start	Knee Vertical Mills	2	09-13-2007 11:59 AM
BobCADCAM Layer Control / Snap Control	jonbanquer	BobCad-Cam	0	01-21-2006 04:10 PM

All times are GMT -5. The time now is 11:49 PM.