The Boxford Project - CNCzone.com-The Largest Machinist Community on the net!

IndHobby · #1 08-11-2004, 01:16 AM

Hello All,

For those of you that are interested we at Industrial Hobbies are starting a new series titled “The Boxford Project”. In part one we are covering the basic math and some of the other engineering aspects of converting a 35+ year old lathe to CNC.

It's something you might want to take a look at.

InventIt · #2 08-11-2004, 08:29 AM

Very cool. I'll be watching.

willygreen · #3 06-18-2006, 05:09 AM

Originally Posted by IndHobby

Hello All,

For those of you that are interested we at Industrial Hobbies are starting a new series titled “The Boxford Project”. In part one we are covering the basic math and some of the other engineering aspects of converting a 35+ year old lathe to CNC.

It's something you might want to take a look at.

I study industrial technology.
I think I can help you to do the Boxfords project .
if you need help please contact me

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A very unexciting project..........	ynneb	DIY-CNC Router Table Machines	21	05-25-2005 02:30 PM
Metal CNC Project	tonofsteel	General Metal Working Machines	14	04-28-2005 01:47 PM
University Digital Electronics Class Project.	wholepair	Stepper Motors and Drives	4	04-27-2005 12:49 AM
Tiny CNC mill project	chuckknigh	DIY-CNC Router Table Machines	11	11-19-2004 02:00 PM
Project a chain	HuFlungDung	OneCNC	1	05-22-2003 07:57 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)